Differences

This shows you the differences between two versions of the page.

--- ctc:ctc-led-en [2025/12/13 15:25] – babbel
+++ ctc:ctc-led-en [2025/12/13 16:13] (current) – [LED] babbel
@@ Line 69: / Line 69: @@
 If the function LED is other then default it can be specified by setting this to > 0.\\
 A function LED is for example the LED which shows the signals aspect.\\
+===AON===
+Always ON, permanently lit LED; the color setting is made in the lower right field of the color values.
 ===Preset===
 Set the LED checkboxes according the default for the object type.\\
+===Rotate===
+If the WS2811 board is operated with power supplied from the right, Rotate the LEDs by 180°.\\
  \\
+===Test==
+Here, the assignment, position, and function of the LEDs on the circuit board can be tested.
+\\
 ====Color====
 ===Mapping===
 The color mapping depends on the object type.\\
 Common are block and route states.\\
+The checkbox can be used to activate blinking.\\
 ===Brightness===
 The brightness of the WS2812 LEDs.\\
+===Preset Color===
+If this is enabled, the color and brightness settings from the preferences will be used.\\
+===Delay===
+Controls the blinking frequency.\\
 ===Copy/Paste===
@@ Line 90: / Line 110: @@
  \\
-====Swap====
-Rotate the LEDs by 180°.\\
- \\
 =====Preset=====
 {{:ctc:ctcdlg_preset-en.png?800}}\\