Differences

This shows you the differences between two versions of the page.

--- rocrailini-automode-en [2025/12/03 20:21] – [Skip signal commands if already set] ericvb
+++ rocrailini-automode-en [2025/12/13 07:47] (current) – [End of day system shutdown] rjversluis
@@ Line 349: / Line 349: @@
 ====End of Day Power Off Delay====
-Amount of seconds to wait for shutdown and power off the system.\\
+Amount of seconds to wait for shutdown and power off the system after the EoD has been finished.\\
+====End of day system shutdown====
+Shutdown the host system, computer, if the EoD is ready.\\
@@ Line 365: / Line 366: @@
 Accessory events which are no sensors or switches will be regarded as signal events.\\
 Enable this option only if manually operated signals, directly on the Command Station, should be displayed correctly in Rocrail.\\
+====Skip signal commands if already set====
+No command is send to the Command Station if the signal (seemingly) shows the wanted aspect.\\
+The "InitField" command should be used to synchronize signals at startup.\\
+| :!: If not set, this function can cause the loc to reduce from V-Max to V-Mid before returning to V-Max, due to signal settings that need to be verified |\\
 ====Reset signal====
 Timer (in seconds) to wait for resetting signals of current block and/or route to red.\\
@@ Line 403: / Line 407: @@
 ====CTC Occupancy priority====
 Default the route color will beset also in case the block has been occupied.\\
+====CTC black on free====
+Use black as fill color in case the object is free,\\
+====CTC Drag and drop====
+Enable DnD from CTC objects.\\