Differences

This shows you the differences between two versions of the page.

--- switch-gen-en [2025/01/30 16:29] – created - external edit 127.0.0.1
+++ switch-gen-en [2025/12/19 08:24] (current) – [Raster] rjversluis
@@ Line 124: / Line 124: @@
-To create a "Double Crossover" (scissor crossing) in Rocrail, 4 switches and a "Center Crossing" have to be utilized, this configuration allows the Router to create the necessary Routes.  \\
+To create a "Double Crossover" (scissor crossing) in Rocrail, 4 raster switches have to be utilized, this configuration allows the Router to create the necessary Routes.  \\
-{{:double_crossing.png}} \\
-In order to show the "Double Crossover" (scissor crossing) on 2 parallel tracks. \\
 {{:double_crossover.png}} \\
-The following Switch Options need to be changed: check the "Raster" function box for all 4 switches, also remove the check in the "Show" box to hide the "Center Crossing". \\
+The following Switch Options need to be changed: check the "Raster" function box for all 4 switches. \\
 Adjust all other tracks accordingly. \\
-{{:sw_raster-en.png}} \\ \\
+{{:sw_raster-en.png}} \\
-**Note: If the routes that cross this "Double Crossover" were created by the Router you should [[route-index-en#remove_auto_generate_flags|remove the auto generated flag]]. Otherwise the next time the Router is used it will delete them and recreate routes that do not contain commands for the invisible "Center Crossing".** \\
+All 4 switches must be listed up in all routes which to avoid crashes.\\
+Remove the generated flag and adde the missing 2 switches.\\