Content → Hardware → mergCBUS

• CAN-GC Overview
• CAN-GC1 | CAN-GC1e | CAN-GC2 | CAN-GC3 | CAN-GC4 | CAN-GC5 | CAN-GC6 | CAN-GC7 | CAN-GC8
  • Firmware

The OPC_ACDAT opcode is used to send text blocks to the CAN-GC8.
The text must be terminated with a zero character.
A new line can be set with the pipe character: '|'. See Text format.

<0xF6> <ADDRhi> <ADDRlo> <Flags (block#)> <Txt0> <Txt1> <Txt2> <Txt3>

OText    0171 text event [-][Good |morning %USER%]
OText    0081 try to resolve [USER]
OText    0287 send text [Good |morning rob]
OCBUS    2132 set display 1:1 to "Good |morning rob"
OCBUS    0170 OPC_ACDAT(0xF6) address=1 display=1 line=0 nr=0 text=[Good]
OCBUS    0170 OPC_ACDAT(0xF6) address=1 display=1 line=0 nr=1 text=[ |mo]
OCBUS    0170 OPC_ACDAT(0xF6) address=1 display=1 line=0 nr=2 text=[rnin]
OCBUS    0170 OPC_ACDAT(0xF6) address=1 display=1 line=0 nr=3 text=[g ro]
OCBUS    0170 OPC_ACDAT(0xF6) address=1 display=1 line=0 nr=4 text=[b   ]

• https://gitlab.com/rocrail/GCA/tree/master/cbus

• https://gitlab.com/rocrail/GCA/-/tree/master/cbus/cangc8/dist/default/production

• http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus